Billigst på PriceRunner
Yamaha C-5000

C-5000 er den oplagte makker til M-5000 effektforstærkeren, og et helt nyt design fra Yamaha.

Designet følger den nye retro-stil, men al teknik er up-to-date og digitalt styret. Volume-kontrollen er speciel til C-5000, og er en gain-variabel elektronisk kontrol der er styret af et analogt potmeter.

C-5000 er fuldt balanceret og har både XLR ind- og udgange. Der er tilmed en højkvalitets RIAA der håndterer både MM og MC-pickupper.

Designet er elegant og tidløst, og finish er i topklasse med pianolakerede sider og ingen synlige skruer.

 

Vis mere
Tekniske specifikationer

Tekniske specifikationer

 

Audio Specifications

  • Input Terminal: RCA:6 (PHONO, TUNER, CD, LINE 1, LINE 2 IN, EXT IN), BAL:4 (PHONO, BAL 1, BAL 2, EXT IN), TRIGGER IN: 1 (Slave mode), REMOTE IN:1
  • Output Terminal: RCA:3 (LINE 2 OUT, LINE 1, LINE 2), BAL:1 (BAL), TRIGGER OUT: 2 (Master mode), REMOTE OUT:1
  • Rated Output Voltage: [Input 200 mV, 20 Hz-20 kHz, 0.01% THD] (BAL BYPASS) 2 Vrms / 150 ohm, (BAL ATT) 1 Vrms / 150 ohm, (LINE 1 / LINE 2) 1 Vrms / 150 ohm), (LINE 2 RECOUT) 200 mVrms / 1.2 kohm
  • Maximum Output Voltage: [1 kHz, 0.05% THD] (BAL) 6 Vrms, (LINE 1 / LINE 2) 3 Vrms, (LINE 2 RECOUT) 3Vrms
  • Input Sensitivity / Input Impedance: [BAL / LINEOUT: 1 V] (BAL) 200 mVrms / 52 kohm, (LINE,etc) 200 mVrms / 47 kohm, [LINE 2 RECOUT, 150mV (1 kHz) ] (PHONO MC 300 ohms) 100 uVrms / 300 ohms, (PHONO MC 100 ohm) 100 uVrms / 100 ohms, (PHONO MC 30 ohm) 100 uVrms / 30 ohm, (PHONO MC 10 ohm) 100 uVrms / 10 ohm, (PHONO MM BAL(UNBAL)) 2.5 mVrms / 52 k(47 kohm), (EXT IN) 1 Vrms / 20 kohm
  • Maximum Input Signal Voltage: [LINE2 REC (1kHz, 0.05% THD)] (BAL) 2.8 Vrms, (BAL ATT) 5.6 Vrms, (LINE,etc) 2.8 Vrms,(PHONO MC) 2 mVrms, (PHONO MM) 50 mVrms, [BAL/LINEOUT (1kHz 0.05% THD)](EXT IN) 5.6 Vrms
  • Frequency Response: [JEITA, Load 22 kohm] (BAL/LINE, etc) +0 / -3 dB (10 Hz-100 kHz), +0 / -0.3 dB (20 Hz-20 kHz)
  • Total Harmonic Distortion Plus Noise: [JEITA, Input: 0.5 V] 0.0100% (BAL [LINE, etc.] to BAL [LINE], 20 Hz-20 kHz), 0.0200% (MM / MC BAL [UNBAL] to LINE 2 RECOUT, 20 Hz-20 kHz)
  • Channnel Separation: [JEITA, Input 1.0 kohm terminated, 1 kHz / 10 kHz] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
  • Function Separation: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 75 dB or higher (MC, BAL / UNBAL), 95 dB or higher (MM, BAL / UNBAL)
  • Signal-to-Noise Ratio: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, 300 ohms, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
  • Residual Noise: [IHF-A network] 3 uV (BAL / LINE OUT)
  • Tone Control Characteristics: (BASS) Boost / Cut [30 Hz] ±9 dB, Turnover Frequency 350 Hz, (TREBLE) Boost / Cut [20 Hz] ±9 dB, Turnover Frequency 3.5 kHz
  • Headphone Jack Rated Output Power: 35 mW + 35 mW (CD, etc. [1 kHz, 32 ohm, 0.2% THD])
  • Deviations from RIAA Equalizer: ±0.5 dB (MC / MM BAL [UNBAL])
  • Subsonic Filter: 15 Hz: -3 dB (MC / MM BAL [UNBAL])

General

  • Power Consumption: 60 W
  • Standby Power Consumption: 0.2 W
  • Power Management (Auto Power Standby): Yes
  • Dimensions (W×H×D): 43.5 x 14.2 x 45.1 cm (17-1/8” x 5-5/8” x 17-3/4”)
  • Weight: 19.1 kg (42.11 lbs)

,

Se alle

Yamaha C-5000

65.300 kr.

C-5000 er den oplagte makker til M-5000 effektforstærkeren, og et helt nyt design fra Yamaha. Designet... Læs mere

På lager

Køb nu - Betal senere
Varenummer (SKU): hifi-Z2118
Yamaha C-5000

C-5000 er den oplagte makker til M-5000 effektforstærkeren, og et helt nyt design fra Yamaha.

Designet følger den nye retro-stil, men al teknik er up-to-date og digitalt styret. Volume-kontrollen er speciel til C-5000, og er en gain-variabel elektronisk kontrol der er styret af et analogt potmeter.

C-5000 er fuldt balanceret og har både XLR ind- og udgange. Der er tilmed en højkvalitets RIAA der håndterer både MM og MC-pickupper.

Designet er elegant og tidløst, og finish er i topklasse med pianolakerede sider og ingen synlige skruer.

 

Tekniske specifikationer

Tekniske specifikationer

 

Audio Specifications

  • Input Terminal: RCA:6 (PHONO, TUNER, CD, LINE 1, LINE 2 IN, EXT IN), BAL:4 (PHONO, BAL 1, BAL 2, EXT IN), TRIGGER IN: 1 (Slave mode), REMOTE IN:1
  • Output Terminal: RCA:3 (LINE 2 OUT, LINE 1, LINE 2), BAL:1 (BAL), TRIGGER OUT: 2 (Master mode), REMOTE OUT:1
  • Rated Output Voltage: [Input 200 mV, 20 Hz-20 kHz, 0.01% THD] (BAL BYPASS) 2 Vrms / 150 ohm, (BAL ATT) 1 Vrms / 150 ohm, (LINE 1 / LINE 2) 1 Vrms / 150 ohm), (LINE 2 RECOUT) 200 mVrms / 1.2 kohm
  • Maximum Output Voltage: [1 kHz, 0.05% THD] (BAL) 6 Vrms, (LINE 1 / LINE 2) 3 Vrms, (LINE 2 RECOUT) 3Vrms
  • Input Sensitivity / Input Impedance: [BAL / LINEOUT: 1 V] (BAL) 200 mVrms / 52 kohm, (LINE,etc) 200 mVrms / 47 kohm, [LINE 2 RECOUT, 150mV (1 kHz) ] (PHONO MC 300 ohms) 100 uVrms / 300 ohms, (PHONO MC 100 ohm) 100 uVrms / 100 ohms, (PHONO MC 30 ohm) 100 uVrms / 30 ohm, (PHONO MC 10 ohm) 100 uVrms / 10 ohm, (PHONO MM BAL(UNBAL)) 2.5 mVrms / 52 k(47 kohm), (EXT IN) 1 Vrms / 20 kohm
  • Maximum Input Signal Voltage: [LINE2 REC (1kHz, 0.05% THD)] (BAL) 2.8 Vrms, (BAL ATT) 5.6 Vrms, (LINE,etc) 2.8 Vrms,(PHONO MC) 2 mVrms, (PHONO MM) 50 mVrms, [BAL/LINEOUT (1kHz 0.05% THD)](EXT IN) 5.6 Vrms
  • Frequency Response: [JEITA, Load 22 kohm] (BAL/LINE, etc) +0 / -3 dB (10 Hz-100 kHz), +0 / -0.3 dB (20 Hz-20 kHz)
  • Total Harmonic Distortion Plus Noise: [JEITA, Input: 0.5 V] 0.0100% (BAL [LINE, etc.] to BAL [LINE], 20 Hz-20 kHz), 0.0200% (MM / MC BAL [UNBAL] to LINE 2 RECOUT, 20 Hz-20 kHz)
  • Channnel Separation: [JEITA, Input 1.0 kohm terminated, 1 kHz / 10 kHz] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
  • Function Separation: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 75 dB or higher (MC, BAL / UNBAL), 95 dB or higher (MM, BAL / UNBAL)
  • Signal-to-Noise Ratio: [IHF-A network, Input 1.0 kohm terminated, JEITA] 110 dB or higher (BAL / LINE, etc.), 80 dB or higher (MC, 300 ohms, BAL / UNBAL), 98 dB or higher (MM, BAL / UNBAL)
  • Residual Noise: [IHF-A network] 3 uV (BAL / LINE OUT)
  • Tone Control Characteristics: (BASS) Boost / Cut [30 Hz] ±9 dB, Turnover Frequency 350 Hz, (TREBLE) Boost / Cut [20 Hz] ±9 dB, Turnover Frequency 3.5 kHz
  • Headphone Jack Rated Output Power: 35 mW + 35 mW (CD, etc. [1 kHz, 32 ohm, 0.2% THD])
  • Deviations from RIAA Equalizer: ±0.5 dB (MC / MM BAL [UNBAL])
  • Subsonic Filter: 15 Hz: -3 dB (MC / MM BAL [UNBAL])

General

  • Power Consumption: 60 W
  • Standby Power Consumption: 0.2 W
  • Power Management (Auto Power Standby): Yes
  • Dimensions (W×H×D): 43.5 x 14.2 x 45.1 cm (17-1/8” x 5-5/8” x 17-3/4”)
  • Weight: 19.1 kg (42.11 lbs)

,

Se alle
Kontakt mig gerne hvis du vil vide mere om produktet.
Casper Høgsted
Butikschef
Mail: ch@lbs.dk

Videochat med butikken

Bare rolig, vi kan ikke se dig. Men du kan se vores store udvalg og få personlig service direkte fra butikken.

Start videochat
cross
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram