Mark Levinson No.585.5 | HIFI Center Jylland

Mark Levinson No.585.5

Tekniske specifikationer


RIAA frequency response: 20Hz to 20kHz, ±0.3dB

Infrasonic filter defeatable, 15Hz, 2nd order (12dB/octave)

Input resistance (Moving Magnet Mode): 47kΩ

Input capacitance (Moving Magnet Mode): selectable; 50, 100, 150, 200, or 680pF

Gain (Moving Magnet Mode): 40dB @ 1kHz

THD+N, 20Hz to 20kHz, 2VRMS output (Moving Magnet Mode): <0.03%

Input resistance (Moving Coil Mode): selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47k

Input capacitance (Moving Coil Mode): 50pF

THD+N, 20Hz to 20kHz, 2VRMS output (Moving Coil Mode): <0.02%, 50 or 60dB settings, <0.04%, 70db setting

Gain (Moving Coil Mode): selectable; 50, 60, or 70dB @ 1kHz

Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz

Damping Factor: >400 @ 20Hz, referred to 8 Ω

Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB

Signal-to-Noise Ratio: >98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), referred to full output – maximum volume setting

Voltage Gain: 40.7dB (maximum volume setting)

Total Harmonic Distortion: <0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω

Preamplifier Section (Analog)

  • Input Impedance: >45k Ω (RCA & XLR)
  • Input Overload: >5.5V RMS (RCA & XLR)

Preamplifier Section (Digital): DAC Board - same as No 585

DAC output voltage @ full scale (0dBFS): 3.7VRMS

DAC frequency response: 20Hz to 20kHz, +0 / ¬–0.2dB

DAC THD, full scale (0dBFS): <0.0001% @ 1kHz, <0.0003% @ 20kHz

DAC SNR (referred to 3.7VRMS / 0dBFS output): >120dB (A-weighted)

PCM sample rates/bit depth: 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits

DSD: Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)




  • Pure Path Phono pre amp — a discrete design with no op-amps and operates exclusively in class A throughout
  • High resolution sound from class A/B amps
  • Ethernet, RS-232, IR and 12V trigger ports
  • Fixed-gain moving magnet (MM) section with five capacitive cartridge-loading settings
  • 4 analog inputs
  • Discrete analog circuitry throughout
  • Mark Levinson extruded aluminum remote
  • Moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings
  • 6 digital inputs: USB, AES/EBU, S/PDIF
  • 200W at 8 ohms; 300-350W at 4 Ohms
  • Ultrasonic filter intelligently compensates for rumble and warping
  • 32-bit/192khz performance, including DSD over PCM via USB 80 Hz high-pass option allows proper operation of a 2.1-channel system
  • Designed and handcrafted in the USA